Table of Contents Show
So, you’ve finally decided to upgrade your bathroom and get a new toilet. Congratulations! But before you rush off to the store and pick out the fanciest model, it’s important to take accurate measurements of your bathroom. After all, you don’t want to end up with a toilet that doesn’t fit or disrupts the overall aesthetic of your bathroom.
Measuring your bathroom for a new toilet may seem like a daunting task, but fear not! We’ve got you covered with this practical guide that will make the process a breeze.
Step 1: Measure the Rough-In
The first and most crucial measurement you need to take is the rough-in. This refers to the distance between the wall behind the toilet and the center of the drainpipe. To measure the rough-in, follow these steps:
- Locate the center of the drainpipe. This is usually found on the floor or against the wall.
- Measure from the center of the drainpipe to the wall behind the toilet. This measurement will determine the rough-in size.
Common rough-in sizes are 10, 12, and 14 inches. Make sure to note down the exact measurement before proceeding to the next step.
Related :
Step 2: Measure the Width
Next, you’ll need to measure the width of your bathroom. This will help you determine the size of the toilet bowl and tank that will fit comfortably in the space. To measure the width, follow these steps:
- Measure the distance between the side walls of your bathroom. Make sure to account for any obstructions such as cabinets or countertops.
- Note down the exact measurement.
Step 3: Measure the Depth
The depth of your bathroom is equally important as it will determine how far the toilet will protrude into the room. To measure the depth, follow these steps:
- Measure the distance from the back wall to the front edge of the vanity or any other fixture in front of the toilet.
- Note down the exact measurement.
Step 4: Consider the Height
While the height of most toilets is standardized, it’s worth considering if you have any specific requirements. Measure the height of your existing toilet and decide if you want to stick with the same height or make any adjustments.
Step 5: Double-Check Your Measurements
Before you head to the store, double-check all your measurements to ensure accuracy. It’s better to be safe than sorry!
Armed with these measurements, you can confidently shop for your new toilet knowing that it will fit perfectly in your bathroom. Remember to consider other factors such as the style, flushing mechanism, and water efficiency when making your final decision.
Now that you know how to measure your bathroom for a new toilet, you’re one step closer to achieving the bathroom of your dreams. Happy shopping!
